GE Digital Energy SR Protection Relay Family

$1.00

  • SR750/760 – Easy to use Feeder Protection System supported by industry leading suite of software tools. Suitable for Bus blocking/Interlocking schemes; High-speed fault detection for arc flash mitigation; Throw over schemes (bus transfer scheme applications); Load shedding schemes based on voltage and frequency elements; Auto-Recloser (760 Only)
  • SR469 – Protection and Management of three phase medium and large horsepower motors and driven equipment, including high inertia, two speed and reduced-voltage start motors. Voltage dependant overload curves; Torque metering and protection, broken rotor bar protection; Most advanced thermal model – Including multiple RTD inputs for stator thermal protection
  • SR745 – Primary and back-up protection and management of small, medium and larger power transformers, auto-transformers and reactors: Variable dual-slope percent differential protection, Magnetizing inrush and over-excitation blocking, ROCOF detection, Over-excitation   (V/Hz) Protection, Restricted Ground Fault Protection, Transformer overload protection
  • SR489 – Application for  Synchronous or induction generators operating at 25Hz, 50Hz or 60Hz; Primary or backup protection in cogeneration applications: Generator stator differential, Distance backup, Reverse power , Loss/Over excitation, Inadvertent energisation, Negative sequence overcurrent, Stator and bearing thermal monitoring
  • Reduce troubleshooting time and maintenance costs -IRIG-B time synchronization, event reports, waveform capture, data logger
  • Draw-out construction allowing for minimized downtime and easy removal/installation
  • Multiple Networking interfaces – 10baseT Ethernet, RS485, RS232, RS422 (not 489); Multiple Protocols – Modbus RTU, Modbus TCP/IP, DNP 3.0 (not 469), DeviceNet (469 only)
  • Multiple Protocols – Modbus RTU, Modbus TCP/IP, DNP 3.0 (not 469), DeviceNet (469 only)
Get A Quote On This Product For Your Project
SKU: cse109 Categories: , , , , Tags: , , , , , ,

Description


Multilin 750/760 Feeder Protection System

Comprehensive, draw out distribution feeder protection and management.

 

The 750/760 Feeder Protection System, a member of the SR Family of protection relays, with draw out capability intended for primary protection and management of distribution feeders. The 750/760 has specific features for industrial environments, including a drawout case to limit downtime during maintenance and conformal coating for harsh environments.

 

Key Benefits

      • Easy to use Feeder Protection supported by industry leading suite of software
      • Accurate built-in metering functions
      • I/O monitoring – improve equipment uptime
      • IRIG-B time synchronization, event reports, waveform capture, data logger
      • Minimize replacement time – Draw-out construction
      • Simplify testing – Built in simulation features
      • Supports industry protocols such as DNP & Modbus
      • Optional 10MB Ethernet port
      • Complete monitoring – Analog I/O, Full metering
      • Leading edge technology – Flash memory for product field upgrade
      • Optional conformal coating for Harsh Environments

Applications

      • Primary protection and control for distribution feeders on solidly grounded, high impedance grounded or resonant grounded systems
      • Bus blocking/Interlocking schemes
      • High-speed fault detection for arc flash
      • Throw over schemes (bus transfer scheme)
      • Load shedding schemes based on voltage and frequency elements
      • Back-up protection for transmission lines, feeders and transformers
      • Distributed Generation (DG) interconnect protection

The feeder management relay shall provide primary protection and management of distribution feeders. Protection shall include:

      • Complete time overcurrent (51P, 51N, 51G), including sensitive ground
      • Complete instantaneous overcurrent (50P, 50N, 50G), including sensitive ground
      • Directional overcurrent (67P, 67N, 67G, 67_2)
      • Bus and Line undervoltage and overvoltage (27/59)
      • Negative sequence voltage (47)
      • Undervoltage automatic restoration (27/79)
      • Bus under-frequency (81U) with voltage and current level monitoring
      • Bus over-frequency (81O) with voltage and current level monitoring
      • Frequency rate-of-change (81D) monitoring
      • Under-frequency automatic restoration (81/79)

 

      • Neutral displacement overvoltage (59N) used to give line to ground fault coverage on high impedance grounded or ungrounded systems, which are isolated.

The relay shall have a drawout construction to facilitate testing, maintenance and interchange flexibility.

The relay shall operate with either wye-connected (four wire) or open-delta-connected (three wire) potential transformers, and three phase, four wire connected current transformers.

Download full specifications

You may also like…

You may also like...

Sign Up For The Latest In
Engineering News